Set Up a Replacement Oura Ring

If you've recently replaced or upgraded your Oura Ring with a new one, this article will help you set up your new Oura Ring.

If, for some reason, you need to purchase a new charger, please do so here.

Prior to Setting Up Your Replacement

1. Go to your device's Bluetooth settings.

2. Locate your ring in the list of connected devices and tap the ⓘ or settings icon to unpair or forget your ring.

Setup for iOS and Android (Version 2.0 or Later)

1. Place your ring on the charger and ensure it's charging.

2. Open the Oura app and tap the spinning ring Icon_Ring_Battery.png in the upper right-hand corner of the Home Icon_Home.png tab.

3. Swipe left.

4. Scroll down to 'Tools' and tap 'Set up new ring.'

5. The Oura app will return you to the new user setup screen. Connect your new ring to the charger and follow the instructions to pair it with the app.

6. After pairing is complete, your new ring is ready to go.

*If you upgraded to a new Oura Ring and your previous ring remains functional, feel free to pass it along to a new user. To transfer your previous Oura Ring to a new user, please follow the instructions outlined in this article

Having Trouble?

If you are experiencing trouble setting up your new ring, please ensure the ring is able to complete its charge. If you've finished charging your ring, but the battery level remains at 60-70%, it's possible the ring is in Power Saving Mode.

To disable Power Saving Mode, please follow the steps below.

1. Place your ring on the charger and ensure it's charging.

2. Open the Oura app and go to the menu icon Icon_Bars.png in the upper left-hand corner of the Home Icon_Home.png tab.

3. Tap Settings Icon_Settings.png.

4. Scroll down to Account and tap Back up all data.

5. Tap Icon_Close.png in the upper left-hand corner to return to the Home Icon_Home.png tab.

6. Tap the ring Icon_Ring_Battery.png in the upper right-hand corner of the Home Icon_Home.png tab.

7. Swipe left.

8. Scroll down and tap Factory reset.

Once you've completed the factory reset, please follow the steps below.

1. Place your ring on the charger and ensure it's charging.

2. Remove the ring from your device's Bluetooth devices.

3. Proceed to reconnect your ring by following the app instructions.

Was this article helpful? 128 out of 190 found this helpful
More questions? Click here to learn more.